Hydro Crimson 5.5″ – Finishing

 

Size:  5.5″ x 7/8″
Cutting Level:  Light to finishing and waxing.
Usage: Rotary or DA Orbital Buffing and Polishing. Pad used for waxes, glazes, and sealants. Pair it up with our G-3500, Carnauba Wax, or Sealant Wax!

Color




DescriptionSpecificationsInstructions

Hydro Crimson 5.5″ Finishing Foam Pad

This Detail Addict Hydro Crimson Foam Pad is designed for finishing and waxing. Can apply waxes, glazes, and sealants in flawless, even coats without causing swirls. The soft foam has very light polishing ability, making it a great choice for cleaner waxes, too. Since the crimson pad is made of Hydro-Tech foam, it does not soak up liquid waxes and paint sealants like some finishing pads can. You’ll be able to cover more paint with less product.

Foam pads must be properly cared for to prolong the life and the consistent performance. Do keep in mind that like everything else they do have a life expectancy and will max out sooner with frequent or improper usage. The following are the general rules to keep your foam pads long lasting and undamaged.

Size:  5.5″ x 7/8″
Cutting Level:  Light to finishing and waxing.
Usage: Rotary or DA Orbital Buffing and Polishing. Pad used for waxes, glazes, and sealants. Pair it up with our G-3500, Carnauba Wax, or Sealant Wax!

Care Instruction

  • Always check if the pad is clean before use.
    When using a new or dry pad, temper and prime the pad surface with detail spray and the polishing agent that you are working with, respectively. This will keep the pad from running dry and spread the compound/polish evenly across the surfaces.
  • Remember the more course/abrasive the foam cutting level is the more firm the foam, therefore will wear down or gets torn easier and quicker when running dry without a lubricant.
  • Periodically rinse or wash the pad when necessary to prevent compound or polish from drying out or build up, becoming caked on the pad.
  • Wash/rinse right after use prior to storage is highly advised. Machine wash pad with liquid detergent and warm water. Do not put it in a dryer. Hand wash and air dry is best.
  • Store pads in a designated clean location to minimize coming in contact with foreign particles that can or potentially be damaging to the buffing surface the next time you use the pad.

*Note: To remove pads from backing plate, grab it between the hook and loop surface of attachment. Never grad grab the pad between the Velcro and the foam, you will damage it.