Ceramic Coating Care Instructions
Ceramic Pro is designed to protect your factory clear coat, to provide a protective shield against the elements and to keep your vehicle looking new at all times. To maximize the effects of Ceramic Pro and to ensure our investment is long lasting, a few basic maintenance steps should be taken. With simple care, your coating will reward you for years to come.
What to do and what not to do
√ Hand Wash
√ Touchless Wash
√ Quality car wash soap with no wax.
√ No wax needed.
√ 350 gsm microfiber wash and dry
√ Wash in shade.
× Automotive Brush Wash
× Don’t wash in sun.
× Don’t wax or polish.
× Don’t use abrasive towels.
The Curing Process
Curing time is 2-3 weeks depending on environmental conditions such as humidity and temperature. During this time, the following should be avoided.
- The coating will protect your clear coat from water spots. The coating is less likely to etch than your factory clear, but it can get spots during process and can be costly to remove.
- Parking under a shedding tree.
- Allowing bird droppings, sap or pollen to sit on the car and bake in the sun.
- Washing or abrading the paint.
If you notice that your car gets water spots, bird droppings, tree sap, etc. during the first two weeks, immediately remove it following our car instructions. Keep in mind the coating is soft; be gentle when working on the paint.
Washing your car at home
Ceramic Pro is extremely slick, this means most things will dissolve and be pulled off by Ceramic Pro’s self-cleaning effect. Minimizing rubbing, (especially with a dry towel) on the coating will ensure its longevity. Dry bird droppings, bus and tree sap can be dissolved using alcohol type solvents and wiped off with a damp microfiber towel.
- For best results the car should be washed on a bi-weekly basis to avoid excessive contamination build-up. Use only recommended mild soaps.
- Avoid high volume brush style car washes, and high PH detergent style cleaners.
- Avoid washing in direct sunlight to minimize streaking and water spotting.
- Wash from the tope down leaving the dirtiest sections for last to avoid cross contamination.
- Use separate soap.
Methods of Washing
- Standard home washing. Use a foam gun (optimal) or microfiber wash mitt to soap down the car. Rinse it off with a pressure washer (optimal) or hose. Dry with clean microfiber towels.
- Spray ‘n wash self-car washes. Select the high pressure soap. Soap the car down (never use the provided brushes especially on the paint!). Rinse car off with the high pressure rinse. Dry with clean microfiber towels.
- Car Washes. Touch-less car washes only. Never use a car wash with brushes! Never select the “spray wax” option.
- Always dry completely and never leave to “air” dry. Tap water contains minerals that may leave deposits creating water spots.
- Only use quality microfiber towels for best results and avoid aggressive wiping. Allowing the materials to absorb the water.
- Never use aggressive products to polish the coating or remove surface contamination.
- Never use excessive force to remove spots.
- Bird droppings, tar, sap, etc. should be removed as soon as possible to avoid temporary staining or hardening on the coating. Any staining left behind from bird droppings will break down over a few days without affecting the coating.
Do not wax the coating. It is unnecessary and the wax will not bond to the coating. Ceramic Pro Sport is the recommended maintenance product. Ask your local installer about getting this applied during your annual maintenance visit.
Always go to a touch free wash! Using an automated car wash with brushes will void warranty and dull the coating. Ceramic Pro 9H takes up to 2 weeks to achieve full hardness. Please handle with care and do not wash the vehicle for the first 2 weeks.
Leather and Fabric Maintenance Program
- For best results, all leather/ vinyl surfaces should be cleaned bi-weekly with a leather protectant to avoid contaminant build-up and replenish the natural oils.
- Vacuum carpets regularly and use carpet and fabric cleaners when necessary.
- Immediately wipe off spills on leather, vinyl, or fabric.
Annual Inspections are the recommended process for ensuring the coating is maintained and care for the vehicle is properly executed. Annual Inspections should be carried out by an approved applicator within 30 days before the anniversary date of the last service to ensure peak performance. Although durable and long lasting, annual inspections ensure maximum gloss and protection from Ceramic Pro coating.